High-Performance Ceramic Resins

LumiCera is the ceramic resin inside the Ceramix-Nano capsule, pre-measured and ready to print. It combines exceptional restorative properties with a minimalist chairside workflow, ensuring superior clinical results with unparalleled simplicity.

Long-Term Durability  
55% ceramic filler content for lasting mechanical strength. 

Biocompatibility
FDA Class II 510(k) cleared for permanent intraoral use. 

Five VITA shades 
Covering the most common natural shades: BL, A1, A2, B1, and C2. Plus 3 new Medium Translucency shades: A1T, A2T, A3T. 

38mm Bridge Capability 
The capsule's built-in chamber accommodates bridges up to 38mm without compromising on fit or accuracy. 

Up to 3 Crowns per Capsule 
Supports printing up to 3 crowns per capsule, maximizing material efficiency and clinical productivity. 

Technical Specifications: 
Filler content: >55% by weight
Density (resin): 1.63 – 1.70 g/cm3
Viscosity (25°C): 2000 – 5500 mPa·s
Bi-axial flexural strength: 200 ± 25 Mpa
3-Point flexural modulus: 8500 ± 1000 Mpa
Vickers hardness: 38 – 44 HV0.5
Fatigue (crown restoration): 10 million cycles at 800 N force
Toothbrush wear (500,000 cycles): 0.3% weight loss at 150 N force
Water sorption: < 24 μg/mm3
Water solubility: < 0.5 μg/mm3
Validated 3D printer: Ceramix-Nano