BROWSE BY CATEGORY
  • Effectiveness Of Temporary Cement Removal

Effectiveness Of Temporary Cement Removal

01/09/2024

Cleaning the Residues & Optimizing your Cementations
After the removal of the temporary crown before cementing a restoration, traditional cleaning methods of the abutment may not be enough for removing residual temporary cement which will reduce the bond strength. KATANA™ Cleaner has a high cleaning effect due to the surface active characteristic of MDP Salt, which is formed from the phosphate monomer "MDP" and an alkaline compound. It is a simple way to optimize your cementation procedures and recover the bond strength.


Test conditions
Adhesion surface treatment: 1 ) Polishing #1000 bovine teeth, 2 ) Temporary Crown (acrylic self-curing resin) was cemented with temporary cement (zinc polycarboxylate cement), 3 ) Stored at 37°C and 95% RH for 1 week, 4 ) Temporary Crown was removed and the temporary cement was removed with an ultrasonic scaler, 5 ) Rubbing with KATANA™ Cleaner for 10 s (upper images)/Water rubbing for 10 s (lower images).


Improving the Bond Strength
As shown on the graphs below, removal of the residual cement either with an ultrasonic scaler or pumice paste & prophylaxis cup may not be enough. After cleaning with KATANA™ Cleaner, its high cleaning effectiveness contributes for an optimized bonding surface.


Test conditions
Adhesion surface treatment: 1 ) Polishing #1000 human teeth, 2 ) Temporary Crown (acrylic self-curing resin) was cemented with temporary cement ( polycarboxylate type, resin-based), 3 ) Stored at 37oC 95% RH for 1 week, 4 ) Temporary Crown was removed and the temporary cement was removed with an ultrasonic scaler or pumice paste and prophylaxis cup at low revolution ( 5000 rpm, 10 s), 5 ) Cleaning with KATANA™ Cleaner.
Bonding strength measurement: 1 ) SUS chip (3mmφ) was bonded by each bonding operation (PANAVIA™ SA Cement Universal, CLEARFIL™ Universal Bond Quick /PANAVIA™ SA Cement Universal, PANAVIA™ V5), 2 ) Measured after storage in water at 37oC for 1 day.


Conclusion
Appropriate cleaning of the residual temporary cement before cementing a restoration is crucial for adequate cementation. KATANA™ Cleaner’s high cleaning effect removes contamination to optimize your cementation procedures.




Article Published Sep - Nov 2024 Dental Solutions


Latest Blog Articles

How can your practice utilise 3D Printing? 3D printing

How can your practice utilise 3D Printing? 3D printing
3D printing has gained popularity because it’s been found to be less expensive than more traditional methods, and clinical appliances and restorations can be produced in-office. Printing uses a streamlined process to produce high-quality results.